If your Robot did not charge and has a 0% battery it must be manually charged to recover.  Inside the workstation there is a power brick used for the power supply.  Unhook the top left connection in the compartment, and use that to charge your CC1.

Charge CC1 as long as you can initially with manual charger; can try sending Robot back to workstation at 25% or greater.  If BoT does not dock, give the charge to at least 40% before trying again.

Unhook the workstation cord in the top left corner. Use that connection in the workstations compartment to plug into the CC1 manual charge port.  Place wire back in workstation and replace the panel

Contact Customer Support for Assistance

Comments(0)